Notifications · Central / All India

Notice / CircularCentral / All India120017/27/GRAP/2021/CAQM

GRAP Stage III construction restrictions in Delhi-NCR

CAQM invoked GRAP Stage III across Delhi-NCR on 6 November 2026. Construction teams must check which dust-generating activities to pause and when exemptions apply.

Published / issued: 06 Nov 2026Effective: 06 Nov 2026
Jurisdiction
Central / All India
Effective from
06 November 2026
Issued on
06 November 2026
Status
Current
Reference
120017/27/GRAP/2021/CAQM

State-wise library

Check another state or UT

Move directly to the published notifications records for a jurisdiction.

Official circular

Reference details

Use the official reference, date, jurisdiction and effective period below before implementation.

Open official government source ↗
Reference number120017/27/GRAP/2021/CAQM
Issue date06 Nov 2026
Effective date / period06 Nov 2026
JurisdictionCentral / All India
Issuing authorityCommission for Air Quality Management in NCR and Adjoining Areas
SubjectNotice / Circular
StatusCurrent

Circular summary

What the circular says

What CAQM ordered

On 6 November 2026 the Commission for Air Quality Management (CAQM) invoked GRAP Stage III across the National Capital Region with immediate effect. Stage I and Stage II measures continued alongside it. Delhi’s daily AQI was 382 when the decision was taken. Forecasts of severe air quality prompted the early invocation. The order applies to covered NCR areas, including Delhi and designated districts of Haryana, Uttar Pradesh and Rajasthan.

Which construction work is restricted

Action 1 of the revised schedule restricts dust-generating work such as excavation, drilling, piling, demolition, open-trench utility work, masonry, ready-mix concrete batching, major welding or gas cutting, specified surface work, major road works and handling dusty material. Minor indoor repair exceptions are limited to the activities specified in the schedule. Minor mechanical, electrical and plumbing welding and pothole repairs are also expressly permitted. Other lower-dust work may continue subject to waste-management rules, dust controls and applicable directions.

The schedule permits specified work for rail and metro, airports and interstate bus terminals, certain defence and nationally important projects, healthcare facilities, qualifying linear public infrastructure and sanitation or water projects. Qualifying ancillary work can also be covered. These permissions are conditional on compliance with applicable waste, dust and CAQM requirements.

What employers and contractors should do

Map each scheduled activity to the order and keep a written record of tasks paused, tasks allowed and the basis for any exemption. Brief subcontractors and site supervisors before allocating shifts, deliveries or equipment. Maintain dust-control records for permitted work and check the applicable district or pollution-control directions. These are environmental controls on site operations. Review workforce scheduling and labour obligations separately. Check subsequent CAQM directions and any site-specific closure notice before resuming restricted work.

Sources and related guidance

Employer reference

Implementation notes

Employer impact: Pause listed dust-generating work unless the project meets an express exception. Keep dust controls in place for permitted work and check local directions. · Action required: Review each activity and site, notify contractors in writing, keep evidence of any exception and check for fresh CAQM or local orders before restarting.

Official circular / document

Open the controlling government source.

e93ab81c-af66-4c41-a6b1-41bdd4a8ff28.pdf · Commission for Air Quality Management in NCR and Adjoining Areas

Open official government source ↗
↑